- Related articles
- What is multi-mode and single-mode fiber?
- Ways to Use PCMCIA Network Card Slot?
- Used in 1000BASE-BX-D Standard Optical Transceiver Models
- Difference between single-mode and multi-mode SFP
- Applicable to 100BASE-EX Standard Optical Transceiver Models
- What is PCI Wireless Ethernet Adapter?
- All Cisco DWDM-XFP-54.94's information (List price, Specs, Datasheet PDF, Compatibility ma
- The Things You Need to Know about 100GBASE-CR4 Ethernet Standards
- The difference between GBIC and SFP
- Optical Transceivers for Cisco WS-C2960S-48LPD-L Switch

Cisco WS-CBS3110X-S Switch Overview
WS-CBS3110X-S belongs to the Cisco Catalyst 3110X Series Switches, it widely used in the campus local area network (LAN) access. The Cisco Catalyst Switch Module 3110X for IBM BladeCenter is an Ethernet switch modules that you install in an IBM BladeCenter enclosure - referred to as the blade enclosure. You can connect devices to the switch modules for connections to other network devices such as routers, servers, and other switches. The Catalyst Switch Module 3110X supports stacking through Cisco StackWise Plus technology.

Cisco WS-CBS3110X-S Switch Parameters
Device Type | Switch - Managed - stackable |
Enclosure Type | Plug-in module |
Subtype | 10 Gigabit Ethernet |
Ports | 1 x X2 |
Routing Protocol | RIP-1, RIP-2, HSRP, static IP routing |
Remote Management Protocol | SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP |
Features | Full duplex capability, routing, ARP support, VLAN support, IGMP snooping, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, virtual blade switch (VBS) |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
Dimensions (WxDxH) | 11.2 cm x 26 cm x 3 cm |
Weight | 1.1 kg |
Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 10GBASE-SR, 10GBASE-LR, 10GBASE-LRM, 10G X2. For more information on these Cisco optical transceivers, please check the following table.
MFG Part number | Description | Price |
X2-10GB-CX4 | Cisco X2-10GB-CX4 Transceiver Module Compatible 10G 10G X2 | |
X2-10GB-SR | Cisco X2-10GB-SR Transceiver Module Compatible 10G 10G X2 850nm 300m | US$74.40 |
X2-10GB-LX4 | Cisco X2-10GB-LX4 Transceiver Module Compatible 10G 10G X2 | |
X2-10GB-LRM | Cisco X2-10GB-LRM Transceiver Module Compatible 10G 10G X2 1310nm 220m | US$141.36 |
X2-10GB-LR | Cisco X2-10GB-LR Transceiver Module Compatible 10G 10G X2 1310nm 10km | US$141.36 |
How to determine what types of optical transceivers for Cisco switches?
Summary
