Provide custom product specifica-tions, icons, logo, packaging.
OM5 Multimode Fiber Patch Cord Cable
Fiber Type
Fiber Counts

OM5 wideband multimode bend insensitive fiber optimized for multi-wavelengths transmission systems operating in the range of 850-953nm, enabling optimal support of emerging Shortwave Wavelength Division Multiplexing (SWDM) applications that reduce parallel fiber count by at least a factor of four to allow continued use of just two fibers (rather than eight) for transmitting 40 Gb/s and 100 Gb/s and reduced fiber counts for higher speeds.

OM5 meets TIA-492AAAE and draft IEC 60793-2-10 A1a.4 requirements while completely backward compatible with existing OM4 networks and applications. It meets RoHS compliant and the fiber patch cord is optically tested for insertion loss to ensure high quality.

Key Features:

  • Low insertion loss.

  • Good reproducibility.

  • High return loss.

  • Good mutual insert performance.

  • Good temperature stability.

Product Highlights:

  • Riser (OFNR) Flame-retardant Jacket.

  • Precision Zirconia Ferrule Connectors Ensure Low Loss.

  • Duplex Zipcord Enhances Mechanical Performance and Reduces Crimping Risk.

  • Bend Insensitive Fiber & 7.5mm Min. Bend Radius.

  • A Wideband Multimode Fiber Solution, Supports at Least 4 Wavelengths at 850-953nm.

  • Support Extended Distances When Using SWDM at 850-953nm.

  • Optical Testing Ensures Network Performance.

  • Compliant to TIA-604 (FOCIS).

Product Offerings:

  • Indoor and outdoor fiber optic cables.

  • Fiber optic patch cords.

  • FTTH drop cables.

  • Fiber optic connectors.

  • PLC splitters.

  • Other passive fiber optic accessories.


  • Fiber Type: 50/125μm OM5 Multimode

  • Fiber Count: Duplex (2-fiber)

  • Connector Type: LC UPC to LC UPC

  • Cable Length: 100m (328ft)

  • Cable Diameter: 2.0 mm

  • Insertion Loss: ≤0.3dB

  • Return Loss: ≥30dB

  • Repeatability: ≤0.2dB

  • Interchangeability: ≤0.2dB

  • Cable Jacket: PVC

  • Environment

  • Operating: -20°C to 70°C

  • Storage: -40°C to 85°C

  • Applications: 10/40/100 Gigabit Ethernet, Data Storage, Legacy LANs


SEESUO Multi-mode OM5 Fiber Optic Patch Cable with LC/UPC-LC/UPC connector.

Each OM5 LC-LC BlueOptics Patch Cable that we sell is guaranteed factory new and is produced with high-quality glass fiber cores of known glass manufacturers such as Corning, Fujikura or YOFC. All connector plugs are equipped with a highly reliable zirconia ceramic ferrule from manufacturers such as Amphenol, Diamond, Nissin Kasei or Reichle & De-Massari. Because of that and a high precision manufacturing process, all Patch Cables offered by gbic-shop.de achieve a low input loss and a high return loss. In addition, further optimization of the return loss by adjusting the Polish (UPC or 8° APC) are possible. Please contact us in case of a demand of such optimized Patch Cables.

For a low smoke emission in case of fire, all BlueOptics Patch Cables are equipped with a flame-resitant, halogen-free LSZH sheathing. BlueOptics OM5 LC-LC fiber optic Patch Cables are suitable for the connection of patch panel ports with each other or the associated connection of optical transceivers, designed for up to 1500 mating cycles and the transmission of optical signals.

SEESUO.COM exclusively sells the high-quality Multi-mode OM5 LC/UPC-LC/UPC Fiber Optic Patch Cables of the SEESUO brand to offer our customers durable products that can meet today's requirements for high-speed data transfer connections.

SEESUO Patch Cables only use high quality components from brand manufacturers to ensure the longevity, accuracy and unlimited functionality of each connection cable. In addition to automated test driving during the production process of SEESUO fiber optic Patch Cables, where the processing of the cable and its transmission characteristics are controlled besides other measures, we also take care of the compliance with the Telcordia standards and the resilience of the material. All SEESUO Patch Cables also meet the highest industrial standards, such as CE and RoHS, as well as the specifications of the TÜV Rheinland, the UL and FCC.

SEESUO.COM guarantee:

All SEESUO Multi-mode OM5 LC/UPC-LC/UPC Fiber Optic Patch Cables, regardless of the type of fiber or other characteristics, are produced according to our highest quality standards. All production processes are subjected to strict quality controls. In addition, each cable is strictly tested before shipping.


Q:We are looking to put in a fiber backbone between our 2 buildings about 300 feet apart outdoors. What cable and connector type (APC or UPC) would you recommend for a LAN link like this?

A:The industrial fiber patch cableis recommended to you. As for the polish type, it depends on your application and equipment, and please kindly note that generally UPC is used for connecting to fiber optic transceivers.

Q:Is this cable suitable for outdoor use? What is the effect if I use it outdoors?

A:No, this cable can only be used indoors. If used outdoors, it may be damaged quickly and the signal transmission will be affected as well. I recommend the industrial fiber patch cable.

Q:Can you offer this cable with short boots?

A:Yes, we can offer LC fiber cables with short boots, and there are three different sizes 12/15/18mm for your choice.

Q:Is this connector length included in the total cable length? For example, for a 1m cable, is the length distribution a 0.02m connector + 0.96m cable + 0.02m connector or a 0.06m connector + 1m cable + 0.06m connector?

A:The connector length of 0.02m is included in the total length. The total length is the distance from the connector ferrule at one end to the ferrule at the other end.

Q:What is the max pulling force that can be applied during installation for the standard cable?

A:The max tensile strength during the cable installation is 70N, but it will be reduced to 90N if it needs to be kept in tension for a long time.

Q:Are you the actual manufacturer?

A:Yes, we are the genuine manufacturer.

Q:Do you accept small orders?

A:Absolutely! We welcome small orders and understand that many businesses start with them.

Q:What certifications do you have?

A:We are certified with ISO9001, SGS, CCC, RoHs, and CE.

Q:How long is your delivery time?

A:Typically, our delivery time ranges from 7 to 20 working days.

Q:How are the cables shipped?

A:Cables can be shipped via various methods, including sea freight, air freight, DHL, FedEx, and EMS.

Q:What are your accepted payment methods?

A:We accept payments through T/T, Western Union, D/P, and more.

Q:Can you provide customized products and branding?

A:Certainly! We offer OEM and ODM services. Feel free to share your specific requirements and logo design with us.

Available for SC, LC, FC, ST connectors. PC/UPC polishing are available in Zirconia ceramic ferrule. Simplex and duplex patch cords and pigtails are jacketed with Kevlar sheath member, aramid yarns and flame-retardant PVC, LSZH, OFNR, OFNP materials
Product Model Fiber Counts Fiber Type Connectors End Face Diameter Length Outer Jacket
SS-1M5-LL-UU-20P-3 1 OM5 LC-LC UPC-UPC 2.0mm 3m PVC
SS-1M5-LS-UU-20P-3 1 OM5 LC-SC UPC-UPC 2.0mm 3m PVC
SS-2M5-LS-UU-20P-5 2 OM5 LC-SC UPC-UPC 2.0mm 5m PVC
SS-2M5-LL-UU-20L-7 2 OM5 LC-LC UPC-UPC 2.0mm 7m LSZH
SS-1D-LF-UU-30L-15 1 OM5 LC-FC UPC-UPC 3.0mm 15m LSZH
SS-2M5-LL-UU-20L-20 2 OM5 LC-LC UPC-UPC 2.0mm 20m LSZH
  • OM5 50/125μm multimode Optical fiber patch cords: Low insertion loss UPC≤0.3dB, high return loss UPC≥50dB
  • Qualified zirconia ferrules
  • Make high-speed ethernet network equipment connections
  • Excellent in repeatability and exchangeability
  • 100% tested and guaranteed to meet all specification
  • Stability between temperature -45 - +80 degrees
  • Customized lengths and connectors are available
  • Aqua blue color and Aqua green color
  • Datacenter Networks
  • FTTX solutions
  • Local area network
  • PON equipment
  • 1 pc per anti-static bag or plastic bag
  • 20/50/100pcs per zip lock package
  • Carton Box
  • Specific labels as request
  • OEM Manufacturer
    SEESUO supports OEM manufacturing by producing products according to the designs and specifications provided by the client. We strictly adhere to commercial confidentiality principles to protect the client's brand and privacy.
  • ODM Manufacturer
    SEESUO has extensive research and development experience and high-quality production management capabilities. We can develop and manufacture products specifically for our clients' brands according to their needs.
  • Customized production
    SEESUO offers highly customized product research and development and manufacturing services with a flexible production model. We are able to meet the small-batch customized production needs of some high-end clients.
  • R&D cooperation
    SEESUO is capable of adapting to the rapidly changing market demands and can collaborate with customers in research and development. We invest resources in R&D to meet customers' specialized requirements and build a strong brand moat.
  • function testing
  • compatibility testing
  • industrial production line
  • adaptive testing
  • data rate testing
  • final inspection
Our certificate