SEESUO BID XFP transceivers are designed for bi-directional 10G serial optical data communications such as IEEE 802.3ae 10GBASE-BX by using 1330(1270nm) transmitter and 1270(1330) nm receiver. The transceiver consists of two sections: The transmitter section uses a multiple quantum well 1330(1270) nm DFB laser and is a class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated 1270(1330) nm detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.

10Gb/s XFP BiDi 1270nm-TX/1330nm-RX 10km Optical Transceiver Module

Optcore’s OXB10G-2310DCR is hot pluggable XFP Bi-Directional transceiver module, which is designed for 10Gb/s duplex optical data communications application. The XFP BiDi module features a highly reliable 1270nm DFB transmitter and 1330nm PIN photo-detector into single LC optical connector, which provides 10km link distance over single-strand single mode fiber.

This XFP BiDi transceiver module also provides digital diagnostic monitoring interface(DDMI), which providing real-time monitoring of the transceiver temperature, laser bias current, optical power, received optical power and transceiver supply voltage. The transceiver module complies with XFP MSA Rev 4.5 specifications, 10 Gigabit Ethernet specifications (10GBASE-LR/LW per IEEE 802.3ae ), and 10G Fibre Channel (1200-SM-LL-L). The transceiver is also a Class 1 laser product complies with FDA/CDRH and IEC-60825 standards.

SEESUO XSP BIDI series consist of 10G XFP BIDI 60KM, 10G XFP BIDI 40KM, 10G XFP BIDI 20KM, and 10G XFP BIDI 10KM, designed for use in 10Gigbit, multi-rate links up to 60KM of G.652 single mode fiber. Compatible with XFP MSA and supporting 10G Ethernet and 10G Fiber Channel protocol, these products are well suited for data center Fast Ethernet and Fiber Channel applications.

Features:

• One Fiber Bi-Directional XFP Optical Transceiver, Bidi WDM XFP

• Fully Compliant with XFP MSA

• Compliant to IEEE 802.3ae 10GBASE-BX

• SFF-8472 Digital Diagnostic Function

• Simplex LC Connector

• 1330TX/1270RX and 1270TX/1330RX

• Distance Up to 10, 20, 40, 60km

• XFI Loopback Mode

• No reference Clock required

• RoHS Compliant

• -5 to 70C Operating

• Simplex LC Connector

Application:

• 10GBASE-BX at 10.3125/ 11.3 Gb/s

• 10GBASE-BX at 9.953 Gb/s

• 8.5G fiber channel 

Specification:

All Calix compatible Bidi XFP transceiver modules are certified for functionality, reliability and performance under rigorous testing parameters. Every Bidi XFP is RoHS and MSA compliant and built with Tier 1 grade components and lasers. Each Calix compatible Bidi XFP module is individually tested in it's intended application with identical functionality to the OEM product. All ENET Bidi XFP modules are backed by an industry-leading lifetime replacement warranty and technical support.

FAQ:

Can XFP connect to SFP?

XFP and SFP are two physically different form factors. 10G and 1G are different signalling protocols, so you can't connect the two, either.

What is an XFP port?

The XFP (10 gigabit small form-factor pluggable) is a standard for transceivers for high-speed computer network and telecommunication links that use optical fiber. It was defined by an industry group in 2002, along with its interface to other electrical components, which is called XFI.

What is the speed of XFP transceiver?

The transceiver chipset supports data rates ranging from 1.25-10.31 Gbpsand such applications as 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps), STM-64 (9.95Gbps).

What is the function of XFP?

The XFP (10 Gigabit Small Form Factor Pluggable) is a standard for modules for high-speed network and telecommunication links that use optical fiber. XFP modules are hot-swappable, protocol-independent and they typically operate at near-infrared wavelengths (colors) of 850nm, 1310nm or 1550nm.

What are the different types of XFP?

Types of XFP Transceiver

The most commonly used types of XFP transceivers are 10GBASE-SR XFP transceiverswhich have a wavelength of 850 nm and a maximum transmission distance of 300 m, and 10GBASE-LR XFP transceivers that have a wavelength of 1310 nm and a transmission distance up to 10 km.

Company Overview:

Shenzhen seesuo technology co., ltd. Was established in 2017, we have been engaged in this industry 7 years. Relying on 7 years of deep experience in the communication field and scientific and technological innovation ability, through the integration of multi-brand, full series of communication products resources, with a one-stop service model. Let the network better connect you and me, connect the world, and make ""Made in China"" can run smoothly in the world. In order to meet the needs of customers, we have eatablished a perfect supply chain system to provide super products with reliable quality and reasonable price. From demestic to international logistics, we have a complete transportation system and services.

We are devoted to offering SFP Optical Transceiver, Switches, Routers, Servers, Storages, OLTs, SDHs, Network Modules, Interface Cards, Security Firewalls, Wireless AP, Optical fiber equipment. Our long-term aim is to provide users high-quality, efficient, economic, timely services. Looking forward to establish long-term and win-win business relations with you.

We are committed to achieving ""the same demand, more abundant sources; The same product, more favorable price, the same price, shorter delivery time; The same delivery time, more convenient service."