Optical Transceivers for Cisco WS-C2960X-48TS-LL Switch-seesuo

HOME > Article > Switch Topics > Switch Encyclopedia

Sort

You can learn about us through other platforms

Optical Transceivers for Cisco WS-C2960X-48TS-LL Switch

2016-10-20

Cisco 2960 Switch SFP Switch Type Of Tutorial

Cisco WS-C2960X-48TS-LL Switch Overview

WS-C2960X-48TS-LL belongs to the Cisco Catalyst 2960-X Series Switches, this switch is best for fresh level business, mid-market, and branch office networks. Size of the business can be small to medium sized for this switch. Cisco Catalyst 2960X Series 48 ports LAN Lite switch is comprised of 48 x Ethernet 10/100/1000 ports and 2 x 1G SFP uplink interfaces. LAN Lite image functions basic needs for layer 2 switching and does not support stacking.

Cisco WS-C2960X-48TS-LL Switch Parameters

Device Type	Switch - 48 ports - Managed
Enclosure Type	Desktop, rack-mountable 1U
Subtype	Gigabit Ethernet
Ports	48 x 10/100/1000 + 2 x Gigabit SFP
Performance	Switching capacity: 100 Gbps ¦ Forwarding performance (64-byte packet size): 104.2 Mpps
Capacity	Virtual interfaces (VLANs): 64
Jumbo Frame Support	9216 bytes
Remote Management Protocol	SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, CLI
Features	Layer 2 switching, DHCP support, auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IPv6 support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, RADIUS support, Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), Cisco EnergyWise technology, Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), NetFlow, Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1ae, IEEE 802.3az, IEEE 802.1AX
Power	AC 120/230 V ( 50/60 Hz )
Power Redundancy	Optional
Dimensions (WxDxH)	44.5 cm x 27.9 cm x 4.5 cm
Weight	4 kg

Optical Transceivers for Cisco WS-C2960X-48TS-LL Switch

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 1000Base-LX/LH, 1000BASE-SX, 1000BASE-T, 100BASE-FX. For more information on these Cisco optical transceivers, please check the following table.

MFG Part number	Description	Price
GLC-LH-SMD	Cisco GLC-LH-SMD Compatible 1000Base-LX/LH SFP 1310nm 10km DOM Transceiver	US$7.00
GLC-SX-MMD	Cisco GLC-SX-MMD Compatible 1000BASE-SX SFP 850nm 550m DOM Transceiver	US$6.00
GLC-T	Cisco GLC-T Compatible 1000BASE-T SFP Copper RJ-45 100m Transceiver	US$13.02
GLC-TE	Cisco GLC-TE Transceiver Module Compatible 1000M SFP Copper 100m	US$13.02
GLC-LH-SM	Cisco GLC-LH-SM Compatible 1000Base-LX/LH SFP 1310nm 10km Transceiver	US$7.00
GLC-SX-MM	Cisco GLC-SX-MM Compatible 1000BASE-SX SFP 850nm 550m Transceiver	US$6.00
GLC-GE-100FX	Cisco GLC-GE-100FX Compatible 100BASE-FX SFP 1310nm 2km Transceiver for Gigabit Ethernet SFP Ports	US$6.98

Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website.

2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6

3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

Summary

The Cisco WS-C2960X-48TS-LL is used for Layer 2 switching. This switch is ideal for applying basic security policies to limit access to the network and reduce threats. It reduces total cost of ownership through simplified installation and operation. Just like all other switches from this series this particular model's also works with a lot of Gigabit Ethernet SFP optical transceivers which can be found in Cozlink with high quality and competitive price. Moreover, most of them have adequate inventory, which ensures the customers to enjoy same day shipping. In addition to providing optical transceivers, Cozlink also offers patch cords, fiber optic pigtails and high speed cables for your choice.