Optical Transceivers for Cisco WS-C2960-48PSTS-RF Switch-seesuo

HOME > Article > Switch Topics > Switch Encyclopedia

Sort

You can learn about us through other platforms

Optical Transceivers for Cisco WS-C2960-48PSTS-RF Switch

2016-10-18

WS-C2960-48PST-S Cisco 2960 Switch SFP Switch Type Of Tutorial

Cisco WS-C2960-48PSTS-RF Switch Overview

WS-C2960-48PSTS-RF belongs to the Cisco Catalyst 2960-C Series Switches; its enhanced features is best utilized in office branch networks, in entry level businesses who are just starting their business operations or in mid markets business who do not possess an excessively large network. The Cisco Catalyst 2960-S and 2960 Series Switches are the leading Layer 2 edge switches, providing improved operational excellence, highly secure business operations, improved sustainability, and an enhanced workspace experience.

Cisco WS-C2960-48PSTS-RF Switch Parameters

Device Type	Switch - 48 ports - Managed
Enclosure Type	Rack-mountable 1U
Subtype	Fast Ethernet
Ports	48 x 10/100 (PoE) + 2 x SFP + 2 x 10/100/1000
Power Over Ethernet (PoE)	PoE
Performance	Switching capacity: 16 Gbps ¦ Forwarding performance (64-byte packet size): 13.3 Mpps
MAC Address Table Size	8K entries
Remote Management Protocol	SNMP 1, SNMP 2, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH-2
Features	Layer 2 switching, auto-sensing per device, DHCP support, power over Ethernet (PoE), auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Quality of Service (QoS), Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP)
Power	AC 120/230 V ( 50/60 Hz )
Dimensions (WxDxH)	44.5 cm x 33.1 cm x 4.4 cm
Weight	5.45 kg

Optical Transceivers for Cisco WS-C2960-48PSTS-RF Switch

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 100BASE-FX, 100BASE-LX, 100BASE-BX-D, 100BASE-BX-U. For more information on these Cisco optical transceivers, please check the following table.

MFG Part number	Description	Price
GLC-GE-100FX	Cisco GLC-GE-100FX Compatible 100BASE-FX SFP 1310nm 2km Transceiver for Gigabit Ethernet SFP Ports	US$6.98
GLC-FE-100FX	Cisco GLC-FE-100FX Compatible 100BASE-FX SFP 1310nm 2km DOM Transceiver	US$6.98
GLC-FE-100LX	Cisco GLC-FE-100LX Compatible 100BASE-LX10 SFP 1310nm 10km Transceiver	US$6.98
GLC-FE-100BX-D	Cisco GLC-FE-100BX-D Compatible 100BASE-BX-D SFP 1550nm-TX/1310nm-RX 10km DOM Transceiver	US$9.77
GLC-FE-100BX-U	Cisco GLC-FE-100BX-U Compatible 100BASE-BX-U SFP 1310nm-TX/1550nm-RX 10km DOM Transceiver	US$8.84

Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website.

2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6

3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

Summary

The Cisco WS-C2960-48PSTS-RF uses Gigabit Ethernet SFP optical transceivers to establish fiber optic connections. These transceiver transceivers are field-replaceable, and provide uplink interfaces when inserted in an SFP module slot. Just like all other switches from this series this particular model's also works with a lot of Gigabit Ethernet SFP optical transceivers which can be found in Cozlink with high quality and competitive price. Moreover, most of them have adequate inventory, which ensures the customers to enjoy same day shipping. In addition to providing optical transceivers, Cozlink also offers patch cords, fiber optic pigtails and high speed cables for your choice.